|
Flexible and stainless metallic fibres for reinforcing precast concrete products
|
FIBRAFLEX metallic fibres improve the mechanical properties and durability of concrete, whether self-levelling or not. The concrete may then be used for the construction of the following products :
|
|
Containers and pits
|
|
|
Thin panels for building facades
|
|
|
Street furniture
|
|
|
Architectural features |
|
|
 |
|
Utilisation
The fibres are in mixed in during the preparation of the concrete.
They are added at the same time as the water.
Typical dosage : from 15 to 25 kg/m³
Product references used :
FIBRAFLEX FF30L6, 30 mm long and 1.6 mm wide
or
FIBRAFLEX FF20L6, 20 mm long and 1.6 mm wide
|
|
|
|
|
|
Example : facade panels
The solution proposed is concrete reinforced with FIBRAFLEX FF30L6 fibres.
Advantages compared to using reinforcing mesh :
|
|
Shorter implementation time
|
| |
 |
No need to place reinforcing mesh at the bottom of the mould |
|
|
Durability
|
| |
|
No risk of rust stains |
| |
|
Better shock resistance (during demoulding + transport) |
|
|
Financial benefit
|
| |
|
30 % cheaper than using made to measure reinforcing mesh (purchase + setup costs)
|
|
|
Aestheticism
|
| |
|
Slim panels can be created
|
|
|
